Ship to:
France
Select the desired shipping method
- Shipping Company Estimated Delivery Time Shipping Cost
Highlight
- Standby control to save power
- CW/CCW/short brake/stop motor control modes
- Built-in thermal shutdown circuit and low voltage detecting circuit
- All pins of the TB6612FNG broken out to 2.54mm spaced pins, and it can be plugged onto the breadboard.
- Filtering capacitors on both supply lines
- Cocok untuk proyek DIY dan mobil pintar
- The motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes - CW, CCW, short-brake, and stop. The two motor outputs (A and B) can be separately controlled, the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode.
Spesifikasi
| Umum | |
|---|---|
| Tipe | Dual Motor Driver Module |
| Chip Pengemudi | TB6612FNG |
| Jumlah | 1 Sepotong |
| Daya | Power supply voltage: VM=15V max, VCC=2.7-5.5V Output current: Iout=1.2A(average) / 3.2A (peak) |
| Cocok | Arduino |
| Note | When using the board at currents up to 0.6A, it may be necessary to improve thermal performance with a heat-sink. |
| Isi Paket | |
| 1 x Mini Motor Driver module | |
Foto Pelanggan
Video Pelanggan
Testimoni Pelanggan
| bintang 5 | 0 | |
| bintang 4 | 0 | |
| bintang 3 | 0 | |
| bintang 2 | 0 | |
| bintang 1 | 0 |
Menulis review
- Semua (0)
- Gambar (0)
- Video (0)
